Hyundai Equus: Airbag Module

Schematic Diagrams

Circuit Diagram (1) Circuit Diagram (2) Circuit Diagram (3) SRSCM Connector terminal No.Function (Connector A)No.Function (Connector B)1-1Rear Side Air Bag RH (Low)2Driver Knee Air Bag (Low)2R ...

Driver Airbag (DAB) Module and Clock Spring Description and Operation

Description The Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal cras ...

See also:

Spliter Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console. (Refer to Body - "Floor Console Assembly") 3. Remove the spliter unit (A) after disconnecting the con ...

To control the vehicle height
Push the vehicle height control button to select the HIGH mode that makes the vehicle higher than the NORMAL mode and the indicator light on the vehicle height control button will illuminate. It i ...

Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...