>
Replacement |
|
|
1. |
Using a screwdriver or remover, remove the inside rear view mirror cover (A). |
2. |
Disconnect the inside rear view mirror connector (A). |
3. |
Push the ECM mirror base down to remove the ECM mirror assembly (B). |
4. |
Install in the reverse order of removal.
|
Rear Variable Damper Schematic Diagrams
Circuit Diagram
1.
Rear variable damper connector
2.
Rear variable damper terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
Rail Pressure Sensor (RPS) Troubleshooting
Signal Waveform
...
Checking the power steering fluid level
With the vehicle on level ground, check the fluid level in the power steering
reservoir periodically. The fluid should be between MAX and MIN marks on the side
of the gauge at the normal tempe ...