>

Hyundai Equus: Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.

Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :

22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.	Disconnect the nozzle hose (A).

3.	Detach the clips, then remove the cowl top cover (B).

4.

Install in the reverse order of removal.

•	Replace any damaged clips.

Components and Components Location

Component Location 1. Cowl top cover ...

Floor Console

...

See also:

Cruise Control Switch Repair procedures
Inspection [Measuring Resistance] 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between terminals on the control switch when each function ...

Auto Defogging Actuator Description and Operation
Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control modul ...

Rear Differential Carrier Components and Components Location
Component 1. Rear differential carrier assembly Component 1. Pinion lock nut2. Companion flange3. Pinion oil seal4. Pinion front bearing5. Differential case6. Side oil seal7. Drain plug8. ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com