>
Components |
No. | Connector A | Connector B |
1 | - | MM CAN high |
2 | Rear camera vedio | - |
3 | Rear camera vedio GND | - |
4 | - | - |
5 | SPDIF GND | - |
6 | SPDIF (+) | IGN 1 B(+) |
7 | - | AUX video |
8 | Illumination (+) | AUX R input |
9 | R Position | AUX GND |
10 | Rear camera shield GND | Front MIC(+) input |
11 | - | ACC B(+) |
12 | Navigation voice (-) | B(+) |
13 | Navigation voice (+) | MM CAN low |
14 | - | - |
15 | SPDIF (-) | - |
16 | - | Vehicle speed |
17 | Illumination (-) | Seering remote GND/Mic GND |
18 | Antenna B(+) ON | - |
19 | x | AUX video GND |
20 | AUX DETECT | |
21 | AUX L input | |
22 | Front MIC(-) input | |
23 | GND | |
24 | GND |
Muffler Repair procedures
Removal
1.
Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side.
2.
Remove the front muffler (A) on LH and RH side.
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...
Components and Components Location
Component Location
1. Slide motor2. Front Height motor3. Rear Height motor4. Recline motor5. Headrest motor6. Cushion extension motor7. Air lumbar support switch8. Air lumbar support pump9. Air l ...
Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above 9.3 mph (15 km/h)
3.Other vehicles are detected in the rear side
If a vehicle is detected within the boundary of the ...