Hyundai Equus: Spliter Unit Description and Operation

Spliter Unit Components and Components Location

Components ...

Spliter Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console. (Refer to Body - "Floor Console Assembly") 3. Remove the spliter unit (A) after disconnecting the con ...

See also:

6 Speed Clutch Control Solenoid Valve Description and Operation
Description 6 Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 6 Clutch. ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Components and Components Location
Component Location Index Engine Room 1. Receiver-drier2. Condenser3. Ambient Temperature Sensor4. Compressor5. Discharge Hose6. Suction & Liquid Tube Assembly7. Service Port (Low Pressure)8. ...