>
Removal |
1. |
Remove the hands free mic (A) from the roof trim. |
Installation |
1. |
Install the hands free mic after connecting the mic connector. |
Inspection |
1. |
Remove the handsfree mic (A) after disconnect the connector from roof top. |
2. |
Check the continuity of Mic between terminals. |
Cylinder Block Repair procedures
Disassembly
Engine removal is required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors ca ...
Rear Seat Frame Assembly Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply pro ...
Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to auto li ...