>
Removal |
1. |
Remove the negative(-) battery terminal. |
2. |
Remove the seats in the car.
(Refer to Body - "Front Seat Assembly") |
3. |
Remove the IMS & PSM module (A) after loosening 4 screws and 4 connectors in the botton of seat. |
Installation |
1. |
Reassemble the IMS & PSM module after connecting the connectors. |
2. |
Reassemble the seats in the car. |
Ignition Coil Specifications
Specification
ItemSpecification Primary Coil Resistance (x)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance (kx)7.0 ± 15% [20°C (68°F)]
...
Components and Components Location
Component Location
1. Windshield wiper arm & blade2. Wiper & washer switch3. Windshield washer hose4. Windshield wiper motor & linkage5. Washer motor6. Washer reservoir
...
Transmission Control Module (TCM) Repair procedures
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check poin ...