>
Inspection |
1. |
Remove the front door trim panel.
(Refer to BD group - "Front door") |
2. |
Check the switch (A) for continuity between the terminals. |
3. |
If the continuity is not as specified, replace the switch. |
Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
eng ...
Components and Components Location
Components Location
[Vehicle Components]
1. Transmission Control Module(TCM)2. Shift lever3. Date Link Connector (DLC)
[Transmission Components]
1. Input speed sensor2. Middle speed se ...
Don't neglect the interior
Moisture can collect under the floor mats and carpeting to cause corrosion. Check
under the mats periodically to be sure the carpeting is dry. Use particular care
if you carry fertilizers, cleanin ...