>
Inspection |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear package tray trim (A) after removing the rear seat.
(Refer to Body - "Rear Package Tray Trim") |
3. |
Remove the rear curtain (A) after disconnecting the connector and rear curtain mounting nuts. |
4. |
Remove the rear curtain motor (A) after loosening the screws. |
Installation |
1. |
Install the rear curtain after connecting the connector. |
2. |
Install the rear package trim and rear seat. |
3. |
Connect the negative battery terminal. |
Heated Steering wheel Description and Operation
Descrption and Operation
The steering wheel heating system will not be active with an
ambient temperature above the system set point temperature. The steering
wheel heater element is connected ...
Height Sensor Repair procedures
Removal
[Front Height Sensor]
•
Avoid suffering excessive impact.
•
Do not entering the water into pin inside.
•
Take care not to be damaged height sensor witc ...
Instrument Cluster Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel after loosening the screws.
(Refer to Body - "Cluster Fascia Panel")
3.
Remove the cluster asse ...