>

Hyundai Equus: Specifications - Blind Spot Detecation system - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Specifications

Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
15x/h ~ 250x/h
Sensible distance
70m (Sedan)
Curvature radius
Start : More than 100m
Stop : Less than 70m
Frequency
24.125 GHz.
Numbers
2EA : Master(RH) , Slave(LH)

    Blind Spot Detecation system
    ...

    Components and Components Location
    Components 1. BSD (Blind Spot Detection) switch module (ON/OFF switch & state LED)2. Speaker (Built in the cluster)3. Head Up Display (HUD)4. BSD warning lamp (Built in the outside mirror)5. ...

    See also:

    Emergency Fastening Device (EFD) Description and Operation
    Description The Emergency Fastening Device (EFD) operates at the same time with the Seat Belt Pretensioner when it satisifies the deployment condition after a collision. It is an auxiliary equi ...

    Repair procedures
    Compression Pressure Inspection     If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up engine to norma ...

    Roof Side Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com