>
Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires.
Avoid using worn or damaged tires which may result in reduced traction or tire failure.
✽ NOTICE
Never exceed the maximum tire inflation pressure shown on the tires.
WARNING
Fuel, engine coolant and engine oil
High speed travel consumes more fuel than urban motoring. Do not forget to check both engine coolant and engine oil.
Drive belt
A loose or damaged drive belt may result in overheating of the engine.
Air Quality Sensor (AQS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Connect the GDS.
3.
Check the output voltage of AQS between terminal 2 and 3.
1. DC 12V( Ignition)2. Sensor ground3. AQS signal
Specif ...
Power Striker Repair procedures
Inspection
Power Trunk Lid Inspection With GDS
1.
Check the power trunk module input/output value by using the
GDS. If the operation of power trunk module is abnormal, replace power
trunk dri ...
TPMS Sensor Description and Operation
Description
1.
General description
(1)
WU is a sensor placed in the tire that reports pressure and temperature.
(2)
The WU is mounted inside the wheels, fixed to the valve. The angle between ...