Hyundai Equus: Cylinder Head Assembly

Timing Chain Repair procedures

Removal Engine removal is required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefu ...

Cylinder Head Components and Components Location

Components [RH] 1. Cylinder head cover2. Cylinder head cover oil seal3. Cylinder head cover gasket4. Exhaust CVVT assembly5. Exhaust camshaft, RH6. Intake CVVT assembly7. Intake camshaft, RH8. C ...

See also:

Water pump Troubleshooting
Troubleshooting Water Pump SymptomsPossible CausesRemedyCoolant leakage • From the bleed hole of the water pump Visually check • Check leaks after about ten-minute warming up. • If ...

Rear Door Window Glass Repair procedures
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 3. After loosening the mo ...

Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel speed sensor mounting bolt. Tightening torque: 6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft) 2. Remove the rear wheel guard. 3. Disconnect the rea ...