Hyundai Equus: Intake Manifold Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold Components and Components Location
| Components |
| 1. Purge control solenoid valve (PCSV) and hose 2. PCV hose 3. ETC module | 4. Intake manifold module 5. MAP sensor |
Intake Manifold Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the engine room cover (A ...
See also:
Rear Door Module Components and Components Location
Component Location
1. Rear door module
...
Transmission Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Description and Operation
Description
Front blind camera is a supplemental system that shows blind spot in front of the vehicle through the AV monitor.
The front blind camera will operate when you push the button
and shi ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com