>
When leaving keys with parking lot and valet attendants, the following procedures will ensure your vehicle’s trunk and glove box compartment can only be opened with the mechanical key.
To lock:
1. Remove the mechanical key from the Smart Key.
2. Unlock the glove box by using the mechanical key, then open it.
3. Set the Trunk Lid Control button to the OFF position (not depressed).
4. Close and lock the glove box using the mechanical key.
5. Leave the Smart Key with the attendant and keep the mechanical key with you.
The Smart Key can only be used to start the engine and operate door locks.
To release:
1. Open the glove box with the mechanical key.
2. Set the Trunk Lid Control button to the ON position (depressed).
In this position the trunk lid will open with the Trunk Lid button or the Smart Key.
Multi-view Camera Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower pannel.
(Refer to Body - "Crash Pad Lower Pannel")
3.
Remove the Multi-view Camera unit (A) after di ...
Rear Right Door Module (RRDM) Description and Operation
Description
1.
Rear Right Power Window Switch
(1)
Main features
ItemExplanationInstallation positon Rear Right Door TrimComponent configuration
1.
Embedded with LIN Communication IC
2.
...
Oil Pump Components and Components Location
Components
1. Oil filter cap2. Oil filter cap O-ring3. Oil filter element4. Oil filter body5. Oil filter assembly gasket6. Oil cooler7. Oil cooler gasket8. Lower oil pan9. Upper oil pan 10. Oil l ...