Hyundai Equus: Rail Pressure Sensor (RPS) Specifications

Rail Pressure Sensor (RPS) Description and Operation

Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in ...

Rail Pressure Sensor (RPS) Troubleshooting

Signal Waveform ...

See also:

Fuel Pump Motor Components and Components Location
Components Pin NO.ItemDescription1Upper body3-phase coil power supply, fuel delivery, and sealing2Stator assemblyCreates an N pole and S pole flux to induce the rotor to turn.3rotor assemblyTorqu ...

Brake Booster Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depress ...

Rear Seat Cushion Cover Repair procedures
Replacement [LH]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and app ...