>
Description |
• |
Monitors the vehicle's operating conditions to determine the optimal gear setting. |
• |
Performs a gear change if the current gear setting differs from the identified optimal gear setting. |
• |
Determines the need for damper clutch (D/C) activation and engages the clutch accordingly. |
• |
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly. |
• |
Diagnoses the automatic transmission for faults and failures. |
Hood Lift Repair procedures
Replacement
•
When removing and installing the hood lifter, an assistant is necessary.
•
When removing the clips, use a clip remover.
1.
Using a screwdriver (A ...
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Supplemental Restra ...