Hyundai Equus: Line Pressure Control Solenoid Vale Schematic Diagrams

Line Pressure Control Solenoid Vale Specifications

Specifications Line Pressure Control VFS x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...

Line Pressure Control Solenoid Vale Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

See also:

Repair procedures
Removal 1. Remove the steering column upper and lower shrouds after loosening screws. 2. Disconnect the multifunction switch connector (A). 3. Remove the wiper & washer switch (A) by p ...

Floor mat anchor(s) (if equipped)
When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward. WARNING The following must be ...

Floor Console Assembly Repair procedures
Replacement [Front Console Assembly]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with prot ...