>
Special Service Tools |
Tool (Number and Name) | Illustration | Use |
09546-26000Strut spring compressor | Compression of coil spring | |
09568-2J100Ball joint remover | Removal of ball joint |
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Alignment Repair procedures
Wheel Alignment
When using commercially available computerized four wheel
alignment equipment (caster, camber, toe) to inspect the front wheel
alignment, always position the car on a level surf ...
Repair procedures
Operation and Leakage Check
Check all of the following items
ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test
drive. If the brakes do not work proper ...