Hyundai Equus: ECU Components and Components Location

Reservoir Tank Repair procedures

Removal     • Before replacing the relevant parts, use GDS equipment to fully discharge the air from the relevant parts. (Refer to Air Suspension System - "Repair procedures ( ...

ECU Description and Operation

Description Analyzes each variety sensor and communication data and executes air suspension control. That part controls system and maintains function. ...

See also:

Repair procedures
Component Replacement after Deployment     Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related ...

Rear Upper Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage t ...

Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto li ...