>

Hyundai Equus: Heated Steering wheel Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inspection

1.

Measure a resistance of NTC and Heated pad.

A.	NTC resistance(Black / Yellow, Black) - 10.0 kx ± 10% (25°C)

B.	Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 x ± 10%

2.

Measure a temperature.

A.	The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute

B.	The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute

C.	At that time switch on, all measure point (1~8)

Heated Steering wheel Schematic Diagrams

Full Circuit Diagram ...

Electro Hydraulic Power Steering

...

See also:

Driving off-road
Drive carefully off-road because your vehicle may be damaged by rocks or roots of trees. Become familiar with the off-road conditions where you are going to drive before you begin driving. ...

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert ...

Thermostat Repair procedures
Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft) 2. Remove the air duct, air intak hose and ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com