>
The purpose of the pre-safe seat belt is to tighten the seat belt during emergency braking, or when a loss of control is sensed.
CAUTION
The pre-safe seat belt activates only when the passenger is wearing his/her seat belt.
The pre-safe seat belt warning light will illuminate if a malfunction is detected with your pre-safe seat belt.
Have the system checked if:
• The light comes on while the vehicle is in motion.
In order to maximize the safety of the passenger, the pre-safe seat belt system operates as below
• The seat belt is tightened when:
- Emergency braking situation occurs
- Losing control of the vehicle
- The passenger leans to one side
• The seat belt vibrates when:
- The Lane Departure Warning System (if equipped) detects the vehicle has moved out of its lane
CAUTION
Do not be surprised when the seat belt vibrates. It's not a malfunction but a warning for your safety.
Other functions are winding a loose seat belt after unfastening the seat belt.
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra distance for braking.
...
Alternator Schematic Diagrams
Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target voltage data
to the alternator via a PWM signal.(High voltage: 4V or hig ...
Steering Wheel Remote Controller (SWRC) Repair procedures
Inspection
1.
Check for resistance between terminals in each switch position.
[LH Top (Audio)]
SwitchConnectorterminalResistance(±5%)Volume Down6-7240 xSeek Down510 xMode940 xVolume Up1.69 kxSee ...