>
When you move the shift lever to the R (Reverse) position, the outside rearview mirror(s) will rotate downwards to aid with driving in reverse The position of the outside rearview mirror switch (1) determines whether or not the mirrors will move:
Left/Right :
When either the L or R switch is selected, both outside rearview mirrors will move.
Neutral :
When neither switch is selected, the outside rearview mirrors will not move.
The outside rearview mirrors will automatically revert to their original positions if any of the following occur:
Front / Rear Parking Assist System Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the BCM unit.
(Refer to Body Control Module - "Body Control Module")
Installation
1.
Install the BCM unit.
2.
Conne ...
Fuel Pressure Control Valve Troubleshooting
Signal Waveform
...
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...