>
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved de-icing fluid to remove the ice. If the lock is frozen internally, you may be able to thaw it out by using a heated key. Handle the heated key with care to avoid injury.
Rear Door Inside Handle Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Disconnect the rear door inside handle lamp connector (A).
3.
After loosening the mounting screws, th ...
Valve Body Components and Components Location
Components Location
1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E Module5. Line presure control solenoid valve6. Damper clutch control solenoid valve7. ON/OFF solenoid val ...
Solenoid Valve Components and Components Location
Components
1. Connected to air tube2. Bracket3. Connector
...