Hyundai Equus: Canister Close Valve (CCV) Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Control/Fuel System / Engine Control System / Canister Close Valve (CCV) Description and Operation
| Description |
Canister Close Valve (CCV) is normally open and is installed
on the canister ventilation line. It seals evaporative emission control
system by shutting the canister from the atmosphere during EVAP leak
detection process.
Fuel Pressure Control Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel ...
Canister Close Valve (CCV) Specifications
Specification
ItemSpecificationCoil Resistance (x)23.0 ~ 26.0 [20°C(68°F)
...
See also:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may c ...
Inhibitor Switch Specifications
Specifications
x Type: Combination of output signals from 4 terminals
Power supply (V)12Output typeCombination of output signals
Signal Code Table
PIN No.PP-RRR-NNN-DDS112V12VO ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com