>
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gage to check tire pressure.You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they're underinflated.
Check the tire's inflation pressure when the tires are cold. - "Cold" means your vehicle has been sitting for at least three hours or driven no more than 1 mile (1.6 km).
Remove the valve cap from the tire valve stem. Press the tire gage firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the pressure is low, add air until you reach the recommended amount.
If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gage. Be sure to put the valve caps back on the valve stems. They help prevent leaks by keeping out dirt and moisture.
WARNING
4&OD Clutch Control Solenoid Valve Description and Operation
Description
4&OD Clutch control solenoid valve is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the 4&OD Clutch. ...
Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
✽ NOTICE
The front tire size is diff ...
Start-Up
You can start the engine without inserting the key. For detailed information
refer to the Engine Start/Stop Button in section 5.
CAUTION
To prevent damaging the Smart Key :
Keep the Smart Key ...