>
Clean the belt webbing with any mild soap solution recommended for cleaning upholstery or carpet. Follow the instructions provided with the soap. Do not bleach or re-dye the webbing because this may weaken it.
Front Wheel Speed Sensor Repair procedures
Removal
1.
Remove the connector after removing the front wheel speed sensor clip.
2.
Remove the front wheel speed sensor.
(Refer to Driveshaft and Axle - "Front Axle Assembly")
3.
Install ...
A/V Mode
This mode displays the state of the A/V system. ...
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel speed sensor mounting bolt.
Tightening torque:
6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft)
2.
Remove the rear wheel guard.
3.
Disconnect the rea ...