>

Hyundai Equus: Crash Pad Side Cover Repair procedures - Crash Pad - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Crash Pad Side Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover (A).
[LH]

[RH]

2.
Install in the reverse order of removal.
   
Replace any damage clips.
    Crash Pad Side Cover Components and Components Location
    Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

    Crash Pad Under Cover Repair procedures
    Replacement [LH]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply ...

    See also:

    Low tire pressure telltale
    ...

    GVWR (Gross vehicle weight rating)
    This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the certification label located on the driver’s door ...

    Hood Latch Release Handle Repair procedures
    Replacement 1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Installation is the reverse of removal.     • Make sure the hood latc ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com