>

Hyundai Equus: Cowl Side Trim Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Interior Trim / Cowl Side Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")

2.	Remove the hood latch release handle. (Refer to Hood - "Hood Latch Release Handle")

3.	Slighty remove the front door body side weatherstrip.

4.	Using a screwdriver or remover, remove the cowl side trim (A).

5.

Install in the reverse order of removal.

•	Replace any damage clips.

Cowl Side Trim Components and Components Location

Component Location 1. Cowl side trim ...

Front Pillar Trim Components and Components Location

Component Location 1. Front pillar trim ...

See also:

Interior care
Interior general precautions Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discol ...

Repair procedures
Removal 1. Remove the steering column upper and lower shrouds after loosening screws. 2. Disconnect the multifunction switch connector (A). 3. Remove the wiper & washer switch (A) by p ...

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com