Hyundai Equus: Spliter Unit Components and Components Location

AUX jack Repair procedures

Removal 1. Remove the floor console upper tray. (Refer to Body - "Floor Console Assembly") 2. Remove the center fascia lower tray. (Refer to Body - "Center fascia pannel") 3. Remove the ...

Spliter Unit Description and Operation

Description The spliter unit receive the LVDS signal from AVN head unit and send it to left/right rear monitor. (LVDS : Low Voltage Differential Signaling ) ...

See also:

Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" ...

8LR Brake Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Rear Package Tray Trim Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protec ...