>
Circuit Diagram |
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel speed sensor mounting bolt.
Tightening torque:
6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft)
2.
Remove the rear wheel guard.
3.
Disconnect the rea ...
ECU Repair procedures
Removal
•
Avoid suffering excessive impact.
•
Do not entering the water into pin inside.
•
Do not pile up the parts.
•
Take care not to damage the pin of ...
Cruise Control Switch Repair procedures
Inspection
[Measuring Resistance]
1.
Disconnect the cruise control switch connector from the control switch.
2.
Measure resistance between terminals on the control switch when each function ...