Symptom
| Probable Cause
| Remedy
|
1. No image output :
Black screen, Blue screen
| Loose multi-view camera unit main connector
| 1) Check connection status and reconnect the connector.
|
Disconnected multi-view camera unit wiring
| 1) Inspect for conductivity of ACC / IGN / V-OUT / M-CAN terminal wiring
|
Faulty IPM (SJB)
| 1) Check power of ACC / IGN terminals : In case of 7.5V or below, inspect IPM (SJB)
|
Faulty multi-view camera unit
| 1) If failure recurs after the items above are confirmed normal, replace multi-view camera unit.
|
2. Abnormal image output : Noise on screen / lines / cracked display / unable to change display
| Loose main connector
| 1) Check connection status and reconnect the connector.
|
Disconnected or short-circuited wiring
| 1) Inspect the wiring relevant to DTC appearance.
|
Faulty tolerance compensation
| 1) If the multi-view camera image display is cracked even
though the camera display is normal, execute tolerance compensation
again.
|
Faulty camera
| 1) If both camera display and multi-view camera image display are cracked, inspect the camera.
|
Faulty IPM (SJB)
| 1) In case of DTC code (C161600) appearance, inspect IPM (SJB).
|
Faulty console switch
| 1) Inspect multi-view camera switch.
- In case of 1.75V or higher with the switch ON, replace the switch.
|
Faulty multi-view camera unit
| 1) If failure recurs after the items above are confirmed normal, replace multi-view camera unit.
|
Hyundai Equus: Troubleshooting
Multi-view Camera Switch Repair procedures
