Hyundai Equus: Emergency braking
Second generation VI (2009–2024) / Hyundai Equus 2009-2024 Owners Manual / Driving your vehicle / Brake system / Emergency braking
If there is a problem with the foot brake while driving, emergency braking is possible by pulling and holding the EPB switch.
However, braking distance will be longer than normal condition.
WARNING
Do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident.
✽ NOTICE
During emergency braking by the EPB, the parking brake warning light will illuminate to indicate that the system is operating.
CAUTION
If there is a noise or burning smell after using the emergency braking, have your vehicle checked by an authorized EQUUS dealer as soon as possible.
When the EPB (electric parking brake) is not released
If the EPB does not release normally, we recommend that you contact an authorized EQUUS dealer by loading the vehicle on a flatbed tow truck and have the system checked.
Electric parking brake (EPB)
Applying the parking brake
To engage the parking brake, first apply the brake pedal and then pull the EPB
switch. Make sure that the brake warning light comes on.
WARNING
Do not operate the p ...
Auto hold
The AUTO HOLD feature keeps the brakes applied after the vehicle comes to a complete
stop when the shift lever is in D, R, or N. The brakes release when throttle is
applied.
Set up
1.Pre ...
See also:
Blind Spot Detection Unit Repair procedures
Removal
Blind spot detection (BSD) unit
1.
Disconnect the negative (-) battery.
Be careful when removing the blind spot detection unit. The bracket may break off from the b ...
Assist Power Seat Module(APSM) Description and Operation
Description
1.
Assist Power Seat Module (APSM)
(1)
Main features
ItemDescriptionInstallation location Lower section of the assist side seatComponent configuration
1.
Embedded with CAN Commu ...
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Categories
Hyundai Equus Manuals
