Hyundai Equus: Power steering pump, belt and hoses
Check the power steering pump and hoses for leakage and damage. Replace any damaged or leaking parts immediately. Inspect the power steering belt (or drive belt) for evidence of cuts, cracks, excessive wear, oiliness and proper tension. Replace or adjust it if necessary.
Steering gear box, linkage & boots/lower arm ball joint
With the vehicle stopped and engine off, check for excessive free-play in the
steering wheel.
Check the linkage for bends or damage. Check the dust boots and ball joints for
deterioration, cracks ...
Drive shafts and boots
Check the drive shafts, boots and clamps for cracks, deterioration, or damage.
Replace any damaged parts and, if necessary, repack the grease. ...
See also:
Windshield Deicer Repair procedures
Inspection
1.
Remove the cowl top cover (A).
(Refer to Body - "Wiper")
2.
Disconnect the windshield deicer connector (A) from the wiper motor linkage.
3.
Check for continuity between the ...
Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Condenser Repair procedures
Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent,
gently bend them using a screwdriver or pliers.
...