>
Tire chains, if necessary, should be installed on the drive wheels (rear wheels).
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and chain wear, do not continue to use tire chains when they are no longer needed.
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the safety belt (A) by turning it in the direction of arrow using a flat ...
Air Quality Sensor (AQS) Description and Operation
Desciption
The Air Quality Sensor (AQS) is located at the center support
in front of the engine radiator. It detects hazardous elements in
ambient air providing output signal to the control.
A ...
Smart Cruise Control Unit Description and Operation
Description
The smart cruise control unit is installed on the front
center of the chassis. A radar sensor is embedded in the front section
of the unit. This sensor detects vehicles and objects ...