Hyundai Equus: Locking
To lock :
1. Close all doors, engine hood and trunk.
2. Either press the door handle button or press the Door Lock button on the Smart
Key.
3. The hazard warning lights will blink and the chime will sound once. Also the
outside rearview mirror will fold.
4. Make sure the doors are locked by checking the position of the door lock button
inside the vehicle.
✽ NOTICE
The door handle button will only operate when the Smart Key is within 28 in. (0.7 m) from the outside door handle.
Even though you press the outside door handle button, the doors will not lock and the chime will sound for three seconds if any of following occur:
- The Smart Key is in the vehicle.
- The Engine Start/Stop Button is in ACC or ON position.
- Any door except the trunk is open.
Keys
Your EQUUS uses a Smart Key, which you can use to lock or unlock a door (and
trunk) and even start the engine.
1. Door Lock
2. Door Unlock
3. Trunk Unlock
4. Panic
WARNING - Smart key
Leavin ...
Unlocking
To unlock:
1. Carry the Smart Key.
2. Either put your hand in the driver’s outside door handle or press the Door Unlock
button on the Smart Key.
3. The driver’s door will unlock. The hazard w ...
See also:
Transmission Oil Temperature Sensor Schematic Diagrams
Circuit Diagram
...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
A/C Pressure Transducer Repair procedures
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”.
2.
Inspect the voltage value whether it is sufficient to be regular value or ...
Categories
Hyundai Equus Manuals
