>
System Block Diagram |
Component part | Function |
Vehicle-speed sensor, ESP/ABS Control Module | Converts vehicle speed to pulse. |
ECM | Receives signals from sensor and control switches. |
Cruise control indicator | Illuminate when CRUISE main switch is ON (Built into cluster) |
Cruise Control switches | CRUISE switch | Switch for automatic speed control power supply. |
Resume/Accel switch (RES +) | Controls automatic speed control functions by Resume/Accel switch (Set/Coast switch) |
Set/Coast switch (RES -) | |
Cancel switches | Cancel switch | Sends cancel signals to ECM. |
Brake-pedal switch | |
Transaxle range switch (A/T) | |
ETC Motor | Regulates the throttle valve to the set opening by ECM. |
Description and Operation
Description
EHPS uses an electromotor to assist you in steering the
vehicle. It senses the vehicle speed and road condition.If the engine is
off or if the power steering system becomes inoperat ...
Windshield washers
In the OFF position, pull the lever gently toward you to spray washer fluid on
the windshield and to run the wipers 1-3 cycles.
Use this function when the windshield is dirty.
The spray and wi ...
Center Pillar Trim Repair procedures
Replacement
[Center Pillar Lower Trim]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
prot ...