Hyundai Equus: Components and Components Location
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Emission Control System / General Information / Components and Components Location
| Components Location |
| 1. PCV Valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) | 6. Fuel Level Sensor (FLS) 7. Fuel Tank Air Filter 8. Catalytic Converter (WCC, Bank 1) 9. Catalytic Converter (WCC, Bank 2) 10. Catalytic Converter (UCC) |
| 1. PCV Valve | 2. Canister |
|
|
| 3. Purge Control Solenoid Valve (PCSV) | 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) 7. Fuel Tank Air Filter |
|
|
| 6. Fuel Level Sensor (FLS) | 8. Catalytic Converter (WCC, Bank 1) |
|
|
| 9. Catalytic Converter (WCC, Bank 2) | 10. Catalytic Converter (UCC) |
|
|
Schematic Diagrams
Schematic Diagram
...
See also:
Repair procedures
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordance with the procedure for that DTC. (Refer to
DTC guide)
...
Lumbar Support Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear seat back.
(Refer to Body - "Rear Seat Back Cover")
3.
Remove the bladder & ECU/ valve assembly (A) after l ...
Non-operating condition
Driver's Attention
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
- Curved roads, tollgates, etc.
- The surrounding of ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com