>

Hyundai Equus: Transmission Oil Temperature Sensor Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Transmission Oil Temperature Sensor Specifications

Specifications
x Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]
Resistance (kx)
(-40)-40
139.5
(-20)-4.0
47.4
(0)32.0
18.6
(20)68.0
8.1
(40)104.0
3.8
(60)140.0
1.98
(80)176.0
1.08
(100)212.0
0.63
(120)248.0
0.38
(140)284.0
0.25
(150)302.0
0.16

    Transmission Oil Temperature Sensor Description and Operation
    Description Transmission oil temperature sensor monitors the automatic Transmission fluid's temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose ...

    Transmission Oil Temperature Sensor Schematic Diagrams
    Circuit Diagram ...

    See also:

    Sunroof Switch Repair procedures
    Inspection 1. Disconnect the negative (-) battery terminal. 2. Open the sunglass case cover from the overhead console then remove the 2 screws holding the overhead console. Disconnect the sw ...

    Locking
    To lock : 1. Close all doors, engine hood and trunk. 2. Either press the door handle button or press the Door Lock button on the Smart Key. 3. The hazard warning lights will blink and the chime ...

    8LR Brake Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com