Hyundai Equus: Transmission Oil Temperature Sensor Repair procedures
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Transmission Oil Temperature Sensor Repair procedures
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Transmission Oil Temperature Sensor Repair procedures
| Inspection |
| 1. |
Turn ignition switch OFF. |
| 2. |
Disconnect the E Module connector. |
| 3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
| 4. |
Check that the resistance is within the specification.
|
Transmission Oil Temperature Sensor Schematic Diagrams
Circuit Diagram
...
Output Speed Sensor Description and Operation
Description
The output speed sensor is a vital unit that measures the
rate of rotation of the transmission's turbine shaft and output shaft,
and delivers the readings to the TCM. The sensor pr ...
See also:
Spliter Unit Description and Operation
Description
The spliter unit receive the LVDS signal from AVN head unit and send it to left/right rear monitor.
(LVDS : Low Voltage Differential Signaling ) ...
Lower Arm Repair procedures
Removal
[Front Lower Arm]
Replacement the lateral arm
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect ...
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com