>
1. Turn the engine off.
2. Push the fuel filler lid opener button located on the driver’s door. Then the
fuel filler lid slowly open (1).
3. To remove the fuel tank cap (2), turn it counterclockwise. You may hear a hissing
noise as the pressure inside the tank equalizes.
4. Place the cap on the fuel filler door.
Middle Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of middle speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...
Temperature Control Actuator Description and Operation
Description
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the ...