Hyundai Equus: 35R Clutch Control Solenoid Valve(35R/C_VFS) Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) Description and Operation
| Description |
35R Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the 35R Clutch.
4&OD Clutch Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Specifications
Direct control VFS[35R/C]
x Control Type : Normal high type
Control Pressure kpa (kgf/cmx, psi)0 ~ 2108.42(0 ~ 21.5, 0 ~ 305.80)Current value(mA)0~1100 Internal ...
See also:
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
...
Damper Clutch Control Solenoid Valve Schematic Diagrams
Circuit Diagram
...
Drive shafts and boots
Check the drive shafts, boots and clamps for cracks, deterioration, or damage.
Replace any damaged parts and, if necessary, repack the grease. ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com