>

Hyundai Equus: Damper Clutch Control Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Damper Clutch Control Solenoid Valve Specifications

Specifications
Damper Clutch Control VFS
x Control type : Normal low type
Control Pressure kpa (kgf/cmx, psi)
0~500.14
(0~5.1,0~72.54)
Current value(mA)
0~850
 Internal resistance(x)
4.8~5.4

    Damper Clutch Control Solenoid Valve Description and Operation
    Description Damper Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Damper Clutch. ...

    Damper Clutch Control Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Steering Column Shroud Panel Repair procedures
    Replacement [Steering column shroud lower panel]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it w ...

    Brake Pedal Components and Components Location
    Components 1. Brake pedal member assembly2. Stop lamp switch3. Clevis pin 4. Snap pin5. Brake pedal 6. Return spring7. Bolt ...

    Fuel Pump Control Module (FPCM) Specifications
    Specification ltemSpecificationSupply Voltage (V)8~18Supply Current (A)Max. 10Fuel Pressure (kpa)Starting600Drive350 ~ 500Stop20  Under ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com