Hyundai Equus: Propeller Shaft Components and Components Location

Propeller Shaft Assembly

...

Propeller Shaft Repair procedures

Inspection CV Joint and Boots 1. Shift the transaxle to Neutral. 2. Raise the vehicle off the ground, and support it with safety stands in the proper locations. 3. Check the center beari ...

See also:

Rear Seat Belt Buckle Repair procedures
Replacement [Sedan 6:4] 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly") 2. Loosen the mounting bolt, and then remove the rear seat belt buckle (A). [L ...

Canister Close Valve (CCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

To Reset the Power Trunk
If the battery has been discharged or disconnected, or if the related fuse has been replaced or disconnected, reset the Power Trunk as follows: 1. Move the shift lever to the P(Park) position. 2. ...