>
Fuel Filler Door Release Actuator Repair procedures
Inspection
1.
Remove the trunk room left side trim.
2.
Open the fuel filler door and remove the housing.
(Refer to the BD group - "Exterior")
Do not reuse the fuel fill ...
6 Speed Clutch Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Head Lamps Repair procedures
Inspection
Head Lamp Relay Inspection
1.
Pull out the head lamp relay (Low) (A) from the engine compartment relay box.
A : Head lamp(Low) relay
2.
Check for continuity between terminals. The ...