>

Hyundai Equus: Height Sensor Schematic Diagrams - Air Suspension System - Suspension System - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Height Sensor Schematic Diagrams

Circuit diagram
1.
Height sensor connector

2.
Height sensor terminal function
Terminal
Function
1
Height Sensor Ground
2
-
3
-
4
-
5
Height Sensor Power
6
Height Sensor Signal

3.
Circuit diagram

    Height Sensor Description and Operation
    Description The ground clearance sensor is one component of the ECS system. This sensor is installed between the vehicle body and lower suspension arm. It measures the ground clearance and sen ...

    Height Sensor Repair procedures
    Removal [Front Height Sensor]     • Avoid suffering excessive impact. • Do not entering the water into pin inside. • Take care not to be damaged height sensor witc ...

    See also:

    Receiver-Drier Repair procedures
    Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening torque : 2.7 ~ 3.1 N.m (0.28 ~ 0.32 kgf.m, 2.0 ~ 2.3 lb-ft) ...

    Fuse/relay panel description
    Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. ✽ NOTICE Not all fuse panel descriptions in this manual may be applicable to ...

    Rear Door Side Curtain Schematic Diagrams
    Circuit Diagram ...

    Categories

    Hyundai Equus Manuals


    © 2011-2025 Copyright www.heqmanual.com