>
Replacement |
1. |
Remove the air cleaner (A). |
2. |
Loosen the nut and then remove the air filter (A). |
3. |
Remove the front bumper.
(Refer to Body - "Front Bumper") |
4. |
Remove the left head light.
(Refer to Body Electrical System - "Head Lamp Leveling Device") |
5. |
Disconnect the all connecter. |
6. |
Remove the mounting bolt, pressure hose (A), return hose (B).
|
7. |
Installation is the reverse of the removal. |
Crash Pad Under Cover Repair procedures
Replacement
[LH]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply ...
Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench (A).
Tightening torque :
2.7 ~ 3.1 N.m (0.28 ~ 0.32 kgf.m, 2.0 ~ 2.3 lb-ft)
...
TPMS Sensor Repair procedures
Removal
Tire Removal
1.
Deflate tire & remove balance weights.
•
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should ...