>

Hyundai Equus: Brake Pedal Components and Components Location - Brake System - Brake System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Brake Pedal Components and Components Location

Components

1. Brake pedal member assembly
2. Stop lamp switch
3. Clevis pin
4. Snap pin
5. Brake pedal
6. Return spring
7. Bolt

    Brake Line Repair procedures
    Removal 1. Remove the wheel & tire. 2. Remove the brake hose clip (A). Front Rear 3. Disconnect the brake tube by loosening the tube flare nut. Tightening torque : 12.7 ~ 16.7 N ...

    Brake Pedal Repair procedures
    Removal 1. Remove the lower crash pad. (Refer to Body - "Crash Pad") 2. Disconnect the stop lamp switch connector (A). 3. Remove the mounting bracket nut (B). Tightening torque : 14. ...

    See also:

    Rear Door Window Glass Repair procedures
    Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 3. After loosening the mo ...

    Emergency towing
    If towing is necessary, we recommend you to have it done by an authorized EQUUS dealer or a commercial tow truck service. If towing service is not available in an emergency, your vehicle may be t ...

    Troubleshooting
    Troubleshooting SymptomProbable causeRemedyExcessive play in steeringLoose yoke plugRetightenLoose steering gear mounting boltsRetightenLoose or worn tie rod endRetighten or replace as necessaryS ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com