>
Description |
- |
Wiper control (Rain sensor communication and transfer Rain sensor request information to Wiper module) |
- |
Lamp control (Tail, Head Lamp Low and High, Front fog, Room Lamp Auto Cut, Rear Fog lamp Control) |
- |
Turn Signal Control |
- |
External Buzzer and Burglar Alarm Horn control |
- |
Input signal sends via CAN for local functions (Hood switch, DRL option) |
Console Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the console temperature control actuator connector.
3.
Verify that the console temperature control actuator operates
to the defr ...
Components and Components Location
Component Location
1. DDM (Driver Door Module)2. ADM (Assist Door Module)3. Front window motor4. Rear window motor5. Rear window switch
...
Front Door Inside Handle Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Disconnect the front door inside handle lamp connector (A).
3.
After loosening the mounting screws ...