>

Hyundai Equus: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, then remove the height adjustor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Height Adjust Components and Components Location
    Component Location 1. Height adjust ...

    Front Seat Belt Buckle Components and Components Location
    Component Location 1. Front seat belt buckle ...

    See also:

    Fuel Pump Control Module (FPCM) Description and Operation
    Description The fuel pump control module (FPCM) is installed on the right side of the trunk compartment. It controls the BLDC (Brushless DC) motor mounted inside the variable low pressure fuel ...

    Components and Components Location
    Component Location 1. DDM (Driver Door Module)2. ADM (Assist Door Module)3. IPM (Instrument Panel Module)4. Door lock knob5. Trunk lid actuator6. Front door lock actuator7. Rear door lock actuato ...

    Rolling code programming
    Rolling code devices which are "code-protected" and manufactured after 1996 may be determined by the following: Reference the device owner's manual for verification. The handheld ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com