>
Replacement |
|
|
1. |
Using a screwdriver or remover, remove the inside rear view mirror cover (A). |
2. |
Disconnect the inside rear view mirror connector (A). |
3. |
Push the ECM mirror base down to remove the ECM mirror assembly (B). |
4. |
Install in the reverse order of removal.
|
Auto Defogging Sensor Description and Operation
Description
The auto defogging sensor is installed on the front window
glass. The sensor judges and sends signal if moisture occurs to blow out
wind for defogging. The air conditioner control m ...
Blind Spot Detection Unit Schematic Diagrams
Circuit Diagram
...
ESP Control Unit Components and Components Location
Components
[Standard]
1. Front-right tube2. Rear-left tube3. Rear-right tube4. Front-left tube5. MC26. MC17. ESP control module connector8. ESP control module(HECU)9. ESP HECU bracket
[Premiu ...